How much does automatic door repair cost in Toronto?

Most automatic door repairs in Toronto cost between $200 and $800 CAD depending on the brand, the failed component, and labour time. Motor replacements and control board failures tend to be at the higher end. KDL Locksmith provides a quote before starting any work.

How long does automatic door repair take?

Most repairs are completed in 1–3 hours on a single visit. If a specialty part needs to be ordered for older or less common brands, a follow-up visit may be required. KDL Locksmith keeps parts in stock for Dormakaba, Horton, Tormax, and other common brands.

Can you repair any brand of automatic door?

Yes. KDL Locksmith services all major automatic door brands including Dormakaba, Horton, Tormax, Besam, Micom, Ditec, Rhinotek, and Hunter, serving Toronto and the Greater Toronto Area.

My automatic door stopped working after a power outage — is it broken?

Not necessarily. Many automatic door operators have a manual release mode for power failures. The operator may also need a reset after power is restored. KDL Locksmith can walk you through the reset steps over the phone, or send a technician if needed.

Do you install new automatic door operators as well as repair them?

Yes. KDL Locksmith installs new automatic door operators for commercial entrances, retail storefronts, medical offices, and residential buildings across Toronto and the GTA.

Are your automatic door installations AODA compliant?

Yes. All automatic door installations by KDL Locksmith meet AODA (Accessibility for Ontarians with Disabilities Act) requirements, including activation button height, opening force, and response time.

What is the lifespan of an automatic door operator?

Most commercial automatic door operators last 10–15 years with regular maintenance. High-traffic doors may need replacement sooner. KDL Locksmith offers maintenance contracts to extend operator life.

Do you offer emergency automatic door repair in Toronto?

Yes. KDL Locksmith offers emergency service for commercial automatic door failures in Toronto and the GTA. Same-day service is available.

KDL Locksmith: electric strike repair and installation in Toronto and the GTA

6 days ago

4 min read

Updated: 6 hours ago

A commercial locksmith repairs electric strikes, since the fault can sit in the strike, the latch or the frame. KDL Locksmith installs and repairs electric strikes. KDL Locksmith is a commercial locksmith serving Toronto and the GTA. Call KDL Locksmith at 416-303-0255.

Who repairs electric strikes

Electric strike repair belongs with a commercial locksmith. The strike sits in the door frame, works with the latch on the door, and takes its signal from an entry device such as a buzzer, keypad or fob reader. A fault can come from any of these parts, so the person fixing it needs to understand door hardware first.

KDL Locksmith installs and repairs electric strikes. KDL Locksmith is a commercial locksmith serving Toronto and the GTA. KDL Locksmith is licensed & insured. For other commercial door work, see commercial locksmith services.

What an electric strike does

An electric strike takes the place of the fixed strike plate in the door frame. When it receives a signal, it lets the latch pass so the door can open without a key.

Common devices that send that signal:

A buzzer or intercom
A keypad
A card or fob reader
A push button

Electric strikes come in two modes. A fail secure strike keeps the door locked when power is lost. A fail safe strike releases the door when power is lost. Which one fits depends on how the door is used.

Who can install an electric strike

A commercial locksmith can install an electric strike, including on many existing doors. The strike is fitted into the frame and lined up with the latch so the door closes and releases cleanly. Whether a particular door and frame can take one is decided by looking at it.

KDL Locksmith installs and repairs electric strikes. If the strike is part of a wider keyless entry setup, see access control. Call KDL Locksmith at 416-303-0255.

Why an electric strike buzzes but does not unlock

If you hear the buzz but the door stays locked, the strike is getting a signal but the latch is not being freed. That can come from the strike, the latch, or a door and frame that no longer line up. Only an on-site check can confirm which.

Do not open the strike or the wiring yourself. Before you call, note a few details for the technician:

Does it happen every time, or only some of the time?
Was the door knocked, forced or adjusted recently?
Does the door open if you push or pull it while the buzzer sounds?
Which entry device is used on that door: buzzer, keypad, card or fob?

Have that list ready. Call KDL Locksmith at 416-303-0255.

Signs your electric strike needs repair

Book an electric strike repair when the door stops releasing on a card, fob or buzzer, releases only some of the time, or will not stay locked. Each one affects who can get into the building.

The door does not release when a card, fob or buzzer is used.
The door releases only some of the time.
The latch catches or drags on the frame.
The door does not stay locked after it closes.
The strike or frame is damaged after a forced entry or impact.

If the frame itself is bent or split, read about damaged door frames.

Electric strikes and the rest of your door hardware

An electric strike works with the closer, the latch and the exit hardware on the same door, so it helps when one provider handles the whole door.

KDL Locksmith installs and repairs panic bars and door closers.
KDL Locksmith's services include emergency exit devices.
KDL Locksmith repairs storefront locks, push paddles, deadlatches and bottom rail locks on aluminum storefront doors.

For door closers and code questions, see door closer requirements.

Call KDL Locksmith at 416-303-0255

Call KDL Locksmith at 416-303-0255. KDL Locksmith installs and repairs electric strikes. KDL Locksmith is a family business and has been in the trade since 1988. KDL Locksmith's shop is at 2060 Steeles Ave W, Unit 4, Vaughan.

Have the building address, the door location and the details from the checklist above ready when you call.

Frequently asked questions

Can an electric strike be added to my existing door?

Often, yes. The strike replaces the fixed strike plate in the frame and has to line up with the existing latch. Whether your door and frame can take one is confirmed by looking at the door.

What is the difference between fail safe and fail secure?

A fail safe strike releases the door when power is lost. A fail secure strike keeps the door locked when power is lost. The right choice depends on how the door is used.

Can an electric strike work with a buzzer or intercom?

Yes. A buzzer or intercom is one of the common devices that sends the signal to release an electric strike, along with keypads, card or fob readers and push buttons.

Who should I call when my buzz-in door will not open?

A commercial locksmith. KDL Locksmith installs and repairs electric strikes. Call KDL Locksmith at 416-303-0255.

Call KDL Locksmith at 416-303-0255, or request service online.