How much does automatic door repair cost in Toronto?

Most automatic door repairs in Toronto cost between $200 and $800 CAD depending on the brand, the failed component, and labour time. Motor replacements and control board failures tend to be at the higher end. KDL Locksmith provides a quote before starting any work.

How long does automatic door repair take?

Most repairs are completed in 1–3 hours on a single visit. If a specialty part needs to be ordered for older or less common brands, a follow-up visit may be required. KDL Locksmith keeps parts in stock for Dormakaba, Horton, Tormax, and other common brands.

Can you repair any brand of automatic door?

Yes. KDL Locksmith services all major automatic door brands including Dormakaba, Horton, Tormax, Besam, Micom, Ditec, Rhinotek, and Hunter, serving Toronto and the Greater Toronto Area.

My automatic door stopped working after a power outage — is it broken?

Not necessarily. Many automatic door operators have a manual release mode for power failures. The operator may also need a reset after power is restored. KDL Locksmith can walk you through the reset steps over the phone, or send a technician if needed.

Do you install new automatic door operators as well as repair them?

Yes. KDL Locksmith installs new automatic door operators for commercial entrances, retail storefronts, medical offices, and residential buildings across Toronto and the GTA.

Are your automatic door installations AODA compliant?

Yes. All automatic door installations by KDL Locksmith meet AODA (Accessibility for Ontarians with Disabilities Act) requirements, including activation button height, opening force, and response time.

What is the lifespan of an automatic door operator?

Most commercial automatic door operators last 10–15 years with regular maintenance. High-traffic doors may need replacement sooner. KDL Locksmith offers maintenance contracts to extend operator life.

Do you offer emergency automatic door repair in Toronto?

Yes. KDL Locksmith offers emergency service for commercial automatic door failures in Toronto and the GTA. Same-day service is available.

Micom door operator repair in Toronto and the GTA

5 days ago

2 min read

Updated: 10 hours ago

KDL Locksmith repairs and installs automatic doors across Toronto and the GTA, including Micom operators. KDL Locksmith is a family business and a commercial locksmith serving Toronto and the GTA. Call 416-303-0255 with your door type and what the door is doing, or request service online.

Micom door operator repair from KDL Locksmith

KDL Locksmith services Micom, Ditec, Besam, dormakaba, Hunter, Horton, Rhinotek and Tormax automatic doors.

KDL Locksmith is a family business.
KDL Locksmith has been in the trade since 1988.
KDL Locksmith is licensed & insured.
KDL Locksmith's shop is at 2060 Steeles Ave W, Unit 4, Vaughan.

The automatic door repair by brand page and the automatic door repair service page have more detail.

Which Micom operator do you have?

Check the label on the operator header above the door and give the model when you call.

If you cannot find a label, take a photo of the operator and the whole door.

Common automatic door problems

Most automatic door faults show up as a door that is stuck open, stuck shut or opening on its own. Note which of these you see:

The door stays open or will not open at all.
It opens or closes with nobody near it.
It moves slowly, jerks or makes new noise.
It ignores the push plate or a person walking up.

If the door will not open, see automatic door not opening for a few checks first. Call KDL Locksmith at 416-303-0255.

Other hardware on the same entrance

An automatic entrance usually has manual hardware on the same opening.

KDL Locksmith installs and repairs panic bars and door closers.
KDL Locksmith's services include emergency exit devices.
KDL Locksmith installs and repairs electric strikes.
KDL Locksmith repairs storefront locks, push paddles, deadlatches and bottom rail locks on aluminum storefront doors.

Book a Micom door repair

To book a Micom door operator repair in Toronto or the GTA, call KDL Locksmith at 416-303-0255. Have this ready:

The building address and which door it is.
Sliding or swing.
The model label, or a photo of the operator.
What the door is doing and since when.

Frequently asked questions

Who repairs Micom door operators in Toronto?

KDL Locksmith repairs and installs automatic doors across Toronto and the GTA, including Micom operators. Call KDL Locksmith at 416-303-0255.

Can an older Micom operator still be repaired?

It depends on the model and its condition. Have the model label or a photo of the operator ready and call KDL Locksmith at 416-303-0255.

Does KDL work on other automatic door brands?

Yes. KDL Locksmith services Micom, Ditec, Besam, dormakaba, Hunter, Horton, Rhinotek and Tormax automatic doors.

Do you repair Micom doors another company installed?

Have the model and a short note of the problem ready, then call KDL Locksmith at 416-303-0255.

Call KDL Locksmith at 416-303-0255, or request service online.