How much does automatic door repair cost in Toronto?

Most automatic door repairs in Toronto cost between $200 and $800 CAD depending on the brand, the failed component, and labour time. Motor replacements and control board failures tend to be at the higher end. KDL Locksmith provides a quote before starting any work.

How long does automatic door repair take?

Most repairs are completed in 1–3 hours on a single visit. If a specialty part needs to be ordered for older or less common brands, a follow-up visit may be required. KDL Locksmith keeps parts in stock for Dormakaba, Horton, Tormax, and other common brands.

Can you repair any brand of automatic door?

Yes. KDL Locksmith services all major automatic door brands including Dormakaba, Horton, Tormax, Besam, Micom, Ditec, Rhinotek, and Hunter, serving Toronto and the Greater Toronto Area.

My automatic door stopped working after a power outage — is it broken?

Not necessarily. Many automatic door operators have a manual release mode for power failures. The operator may also need a reset after power is restored. KDL Locksmith can walk you through the reset steps over the phone, or send a technician if needed.

Do you install new automatic door operators as well as repair them?

Yes. KDL Locksmith installs new automatic door operators for commercial entrances, retail storefronts, medical offices, and residential buildings across Toronto and the GTA.

Are your automatic door installations AODA compliant?

Yes. All automatic door installations by KDL Locksmith meet AODA (Accessibility for Ontarians with Disabilities Act) requirements, including activation button height, opening force, and response time.

What is the lifespan of an automatic door operator?

Most commercial automatic door operators last 10–15 years with regular maintenance. High-traffic doors may need replacement sooner. KDL Locksmith offers maintenance contracts to extend operator life.

Do you offer emergency automatic door repair in Toronto?

Yes. KDL Locksmith offers emergency service for commercial automatic door failures in Toronto and the GTA. Same-day service is available.

Automatic Door Repair in Toronto: Who to Call and How to Choose a Service Provider

Jun 11

3 min read

Updated: 4 days ago

Automatic doors in Toronto are repaired by automatic door technicians and commercial locksmiths who service door operators, sensors and the door hardware together. KDL Locksmith repairs, maintains and installs automatic door operators across Toronto and the GTA, including sliding doors, swing door operators and accessible push-button openers, on brands such as Horton, Dormakaba, Besam, Tormax, Ditec, Micom, Hunter and Rhinotek.

Automatic door not working? Call KDL Locksmith at 416-303-0255 or see our automatic door repair service in Toronto.

What automatic door repair covers

Door won't open or close: motor, gearbox, control board or power issues. See automatic door not opening.
Stopped working after a power outage: tripped breakers, reset modes or a damaged control board. See automatic door not working after a power outage.
Worn or failed motor: grinding, slow movement or overheating. See automatic door motor replacement.
Sensor problems: doors opening on their own, not detecting people, or closing on someone.
Push buttons and wave switches that don't activate the door.
Track, roller and guide wear on sliding doors.
Locks and electric strikes that must release before the operator can open the door, which is where a locksmith's skills matter.

Automatic door brands KDL services

KDL Locksmith works on the operator brands most common in GTA offices, clinics, retail stores and condo buildings: Horton, Dormakaba, Besam, Tormax, Ditec, Micom, Hunter and Rhinotek. Not sure what brand you have? The name is usually on the operator header above the door. Send us a photo.

Accessibility: why a broken opener can't wait

In Ontario, powered door operators on accessible entrances and washrooms are part of meeting the Accessibility for Ontarians with Disabilities Act (AODA) and the Building Code's barrier-free requirements. When the opener fails, people using wheelchairs, walkers or strollers can't get in. For building owners, that's both a service failure and a compliance problem, so repair should be scheduled quickly. More on accessible operators in handicap door openers for Ontario washrooms and offices.

How to choose an automatic door repair provider

Brand experience. Ask whether they regularly work on your operator brand and can source the correct parts.
Safety first. The technician should test sensors, safety zones and closing force after every repair, and follow the manufacturer's safety standards.
Doors and hardware together. Many "operator" failures are really a lock, strike, hinge or closer problem. A provider who handles both saves a second visit.
Local and reachable. A GTA-based team can return for follow-up adjustments without a long wait.
Maintenance options. High-traffic doors last longer with scheduled inspections of sensors, belts, tracks and safety settings.

Before you call: quick checks

Check the operator's mode switch. It may be set to off, hold-open or exit-only.
Check the breaker or power switch for the door.
Clear anything in the sensor field or the sliding track.
Make sure the door is unlocked. A locked door blocks the operator.
If the door moves erratically or closes on people, switch it off and keep it off until it's inspected.

KDL Locksmith is a family-owned locksmith with 38 years in the GTA, serving property managers, retailers, clinics and condo boards. Call 416-303-0255 or request a quote online.

Frequently asked questions

Who repairs automatic doors in Toronto?

Automatic door technicians and commercial locksmiths. KDL Locksmith repairs and maintains automatic sliding and swing door operators and accessible push-button openers across Toronto and the GTA.

Which automatic door brands does KDL Locksmith service?

KDL services common operator brands including Horton, Dormakaba, Besam, Tormax, Ditec, Micom, Hunter and Rhinotek.

Why does my automatic door open by itself?

Usually a sensor is picking up movement outside its intended zone, from wind, reflections, signs or passing traffic. Sensor adjustment or replacement typically fixes it.

Is a broken accessible door opener an AODA issue?

It can be. Powered openers on accessible routes help buildings meet Ontario's accessibility requirements, so a failed opener should be repaired promptly.