How much does automatic door repair cost in Toronto?

Most automatic door repairs in Toronto cost between $200 and $800 CAD depending on the brand, the failed component, and labour time. Motor replacements and control board failures tend to be at the higher end. KDL Locksmith provides a quote before starting any work.

How long does automatic door repair take?

Most repairs are completed in 1–3 hours on a single visit. If a specialty part needs to be ordered for older or less common brands, a follow-up visit may be required. KDL Locksmith keeps parts in stock for Dormakaba, Horton, Tormax, and other common brands.

Can you repair any brand of automatic door?

Yes. KDL Locksmith services all major automatic door brands including Dormakaba, Horton, Tormax, Besam, Micom, Ditec, Rhinotek, and Hunter, serving Toronto and the Greater Toronto Area.

My automatic door stopped working after a power outage — is it broken?

Not necessarily. Many automatic door operators have a manual release mode for power failures. The operator may also need a reset after power is restored. KDL Locksmith can walk you through the reset steps over the phone, or send a technician if needed.

Do you install new automatic door operators as well as repair them?

Yes. KDL Locksmith installs new automatic door operators for commercial entrances, retail storefronts, medical offices, and residential buildings across Toronto and the GTA.

Are your automatic door installations AODA compliant?

Yes. All automatic door installations by KDL Locksmith meet AODA (Accessibility for Ontarians with Disabilities Act) requirements, including activation button height, opening force, and response time.

What is the lifespan of an automatic door operator?

Most commercial automatic door operators last 10–15 years with regular maintenance. High-traffic doors may need replacement sooner. KDL Locksmith offers maintenance contracts to extend operator life.

Do you offer emergency automatic door repair in Toronto?

Yes. KDL Locksmith offers emergency service for commercial automatic door failures in Toronto and the GTA. Same-day service is available.

Commercial Lock Repair and Installation in Toronto: A Guide for Businesses

Jun 11

3 min read

Updated: 4d

Commercial locks carry more load, more users and more liability than residential locks, so they're built and serviced differently. A store entrance, an office suite or a condo common door may see hundreds of cycles a day and has to meet fire, accessibility and insurance requirements. This guide covers what commercial lock work includes, what a business owner can safely handle, and how to choose a locksmith for a larger project.

Need a commercial locksmith in Toronto or the GTA? Call KDL Locksmith at 416-303-0255 or request a quote online.

What commercial lock repair and installation covers

Mortise and cylindrical lock repair for worn latches, broken levers and sticking cylinders.
Rekeying after staff turnover, a lost key or a tenant change, so old keys stop working without replacing the hardware.
Master key systems that give managers, staff and cleaners the right access levels with fewer keys.
High-security cylinders from Medeco and Mul-T-Lock with restricted keys that can't be copied at a hardware store.
Panic bars and exit devices on required exits.
Door closers that keep fire doors closing and latching. See our door closer code guide.
Storefront and glass door locks, including narrow-stile aluminum door hardware.
Keyless entry and access control with fobs, cards or keypads, and electric strikes.
Automatic door operators and accessible push buttons.

DIY or professional? What a business can handle

Some small jobs are fine for a maintenance person. Most commercial lock work isn't, because a mistake can leave a door insecure, block a fire exit, or void a warranty.

Usually safe to DIY	Call a commercial locksmith
Lubricating a sticky cylinder with graphite	Rekeying, master keying or high-security cylinders
Tightening loose lever or trim screws	Mortise lock, panic bar or exit device repair
Replacing keypad batteries	Anything on a fire-rated door or required exit
Checking that doors close and latch	Access control, electric strikes and automatic operators

How to choose a commercial locksmith for a larger project

Rekeying an office floor, installing a master key system or fitting access control across several doors needs more than a service call. Before you hire, check:

Commercial experience. Ask about similar buildings: offices, retail, condos, clinics or industrial.
Key system design. A good locksmith plans access levels with you and keeps a record of the key system for future changes.
Key control. Restricted keys should be copied only for your authorized signers.
Insurance and a real address. Ask for proof of liability insurance, and make sure the business has a physical location.
A written, itemized quote with hardware, labour, programming and schedule, so the work can be done around business hours.
Ongoing service. Locks, closers and exit devices need adjustment over time. Choose someone who will still service them next year.

Keep commercial locks working longer

Have high-traffic doors checked once or twice a year: locks, closers, hinges and exit devices together.
Rekey when a key holder leaves on bad terms or a key can't be accounted for.
Keep a simple key log: who holds which key and which doors it opens.
Fix a door that doesn't latch the same day. It's both a security and a fire safety issue.

KDL Locksmith has handled commercial lock work across Toronto and the GTA for 38 years. See our commercial locksmith services or call 416-303-0255.

Frequently asked questions

Should I rekey or replace commercial locks?

Rekey when the hardware works and you only need old keys to stop working. Replace when the lock is worn, damaged, or you're upgrading to high-security cylinders or access control.

What is a master key system?

A key system where each key opens only its own doors, while a master key opens a group of doors or the whole building. It lets owners control access without carrying a key for every lock.

Can I repair a commercial lock myself?

Simple maintenance, like lubricating a cylinder or tightening trim screws, is fine. Mortise locks, exit devices, fire-rated doors and access control should be handled by a commercial locksmith.

Does KDL Locksmith work on condos and multi-unit buildings?

Yes. KDL works with property managers and condo boards on common-area locks, master key systems, door closers, exit devices and access control across Toronto and the GTA.